Storing Ionized Water: Which Container, Glass or Plastic?
Posted by Alkaline Water Plus on 10th Mar 2011
I recently did a series of tests to determine …
Which Container is Best for Storing Ionized Water?
I often get this question from my water ionizer customers, and have been working on discovering the very best methods of storing ionized water for a while now. So far, I’ve discovered that leaving no gap of air inside the container makes a huge difference in the ability to store ionized water and retain the ORP [antioxidant value], which usually escapes in just a few hours of storage. Also, glass appears to be the best container for retaining the ORP and pH values of the ionized water the longest.
The three containers I used in this trial were: 1) a glass jar [the kind used for jamming], 2) a plastic, BPA free, jar with a pull-type top, and 3) a dark, plastic, BPA-free container with a flip-type spout. The water ionizer I used was the Jupiter Athena water ionizer.
The videos are all posted here in order. Beginning/pouring note: I filled each container to the brim in attempts to have no air-gap in the bottle at all. The second container was impossible to do this completely because of the cap design. I tested them at different intervals and have posted the results, below, on a chart for your easy reference.
<
| Ionized WaterFrom Athena Water Ionizer | Glass 
 | Plastic Pull-Top | Plastic Flip-Top | 
| 2/19 After Pouring | 9.7/-774 | ||
| 2/20 17 Hours Later | 9.8/-605 | 10.1/-390 | 9.4/-303 | 
| 2/20 After Pouring | 9.9/-764 | ||
| 2/20 2 Hours Later | 10.6/-775 | 10.6/-724 | 10.6/-385 | 
Conclusions: The glass jar is best for storing ionized water, however if you’re drinking the water within a couple of hours, using a plastic, bpa-free, container filled to the brim is good too. The flip-top lid appears to be a bad design for retaining ORP. So avoid lids that have a way for gas to escape.
 
    